Nov 25 13:03:22 rocks1 in.tftpd: tftpd: read: Connection refused Nov 25 13:03:21 rocks1 in.tftpd: tftpd: read: Connection refused Nov 25 13:03:12 rocks1 in.tftpd: tftp: client does not accept options After increasing the daemon's verbosity, I see the following in /var/log/daemon: I've tried increasing the number of tftp daemons instances xinted will space but I haven't been able to address the problem. The specific error in this case is "Cloud not find ramdisk image: initrd.img-5.4-i386". This usually happens while trying to pull down the initial ramdisk. When I boot more than ~10 servers at the same time, I an occasional TFTP issue.Īffected servers successfully lease an IP but generally encounter failures early in the TFTP process. My question stems from some scalability problems I've bumped into thus far, specifically:ġ. I could use some recommendations on the "ideal" frontend configuration for such a thing. I have a 64-node Rocks cluster up and running and I'm looking to scale toward 1,000 nodes. Get to know more details of each function and configuration please go to Download Center to download the manual of your product.Hello all. Please type in address ftp: //WAN IP to access to it. You can also access the FTP server from external network. Here the LAN IP address of the router is 192.168.1.1. Then type in your account to access to the FTP server. Please open the web browser and type in address ftp: //LAN IP, press enter. Now the FTP server can be accessed by local network. Volume Name - From the pull-down list, select which volume to save the file under.įolder Path- Path to the folder is determined by where the file is saved.įolder Name - Name of the shared folder, customized by users.Įnable Authentication - Select the check box to require users to log in with a username and password.Įnable Write Access - Select the check box to allow users to make changes to the folder content.Įnable Media Sharing - Enable media server function, you may click here to get more info. If you want to customize the shared content, switch off Share All, and click on Add to choose your specific folder. It is set to share all the files by default. If check on Use Default Account, it would be admin/admin. If you choose Use New Account, you will have a separate login account for the USB device. Switch on Enable Authentication on the bottom. On the Folder Settings part below, the Network/Media Server Name can be changed to something else. And you can also try unplug the USB device and plug it back in.Ĭheck the options FTP and FTP (via Internet) to enable FTP server function. If there is no device listed on this page, please click Scan. Check whether the USB device is identified by the modem router. Log in Archer VR900’s web interface by 192.168.1.1 or with the password that you set up.Ĭlick Advanced on the top, then click USB Settings -> Disk Settings on the left side menu. Plug a USB Storage device into the USB port, make sure the USB light lit up on the router. Note: Here take Archer VR900 as an example.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |